Position: industrial area / Rahden
Year of construction: in 2002
Make: wood stand construction (low energy house standard)
Surfaces: ground floor: halls / warehouse / production surfaces approx. 690 m ²
Office surfaces (for a moment without 1. OG) approx. 45 m ²
Lounges, sanitation etc approx. 40 m ²
1. Upper floor warehouse surface approx. 120 m ²
Living-room approx. 70 m ²
Property size: 5.080 m ²
Equipment office: telephone, inside-lying protection against the sun, separated sanitary equipments, other equipment see description
Equipment hall: ground tanks (with heavy current, air, empty tubes), Crane lane, compressed air net, wood chipper, lacquer space with technical equipment(arrangement), other equipment see also previous description
Heating: modern combustion heating to the combustion from wood pellets. 40 m ³ tank warehouse. 3.800 liters of heat accumulator / warmth buffer
Outside area: large enough for large truck mobility
expansion possibilities: exist, you get further information upon inquiry
This exclusive, architecturally pleasing trade object, fulfills already future standards and shows by its outstanding construction quality, connected with a lot of wood, light and pleasant tints, a positive and pleasant working atmosphere and living atmosphere.
The building is established in wood stand construction. In the inside area there are OSB plates with an approx. 180 to 200 mms insulation. The carry ceiling construction of the hall consists of glue binder wood. Outwardly the hall is left in untreated Siberian lark's wood which is plastered office of accommodation wing.
The property designed in low energy construction fulfills already today standards usually to low energy houses are placed. Your advantage: low running costs with environment-friendly management and a higher priority.
In addition, other pluses are the towed roof in the front area of the hall. This makes possible the protected accommodation of delivered material/equipment for you. The driveway can accomodate large trucks without having to execute difficult turning manouvers. Farther still development capacities exist. The object lies in an expelled industrial area.
There is a lacquer space with the equipments technical for this. The arrangement(enclosure) has a rated power of approx. 160 KW. In addition, a lighting system with a bright performance was installed by approx. 1.000 LUXES, so that you will find optimal production conditions on all Lacker work.
3 phase lights with approx. 550 to 600 LUXES exists in the whole production spaces of the hall. Therefore this part of the production area also fulfills the severe directives valid with turning engines.
Besides is available here definitely neuwertiger approx. 30 m long Einträgerlaufkran by 2 electric rope trains in each case as unterflange travelling crane (trolleys) with 2,5 t of load to Best and unloading. The Best and Entladezone is lowered as already mentioned, so that a ground-level very simple management of the TRUCKS is possible.
In the halls, in the front area there is 1 big as well as 2 smaller Sektionaltore. In the rear area of the hall a medium-sized gate with dimensions of approx. 4,20-m height and 4,50 m exists again wide. All halls gates are damed up high-quality and are pursued electrically (firm Hörmann).
In The hall The industrial stone floor inserted here was implemented acid-proof, the other he is been suitable for driving with forklift trucks. Moreover, in the floor itself still several ground tanks with heavy current, compressed air connections and empty tubes exist. The existing heating system with a warmth performance of 200KW burns wood pellets and other materials (there combustion with 650 degrees takes place). Besides, a Lambdasonde controls fully automatically the process of combustion. Then the produced warmth energy is stored in 3 heat accumulators in the form of water tanks whose volume to approx. 3.800 liters calculates. A part of this energy is sold. Approx. 40 m ³ big space(area) is available for the provisioning of the fuel as a warehouse. The heating of the hall takes place about the existing warm air blower heating. With the help of ceiling ventilators the warm air can be pressed when required downwards.
The office area as well as the living area are heated by wall radiators. The office rooms in itself show near a small office and reception range, also 2 rooms used for a moment as a lounge, a kitchen, as well as 2 separated sanitary equipments. Moreover, a small next room was fitted out with a separate shower.
The rooms on the upper floor were rented as a living-room. However, here a later renovation could be carried out to business premises, because such also represented the original use. To the house equipment is to be supplemented that this can be generally described as high-quality. A new value equipped kitchen and a luxurious bath with shower is also found here.